0330 135 8066

What Is a SAP Calculation? Ultimate Guide

March 11, 2026 |

The Standard Assessment Procedure (SAP) is the UK Government’s official method for measuring a dwelling’s energy performance. Essentially, SAP calculations model a property’s fabric and services to produce an energy-efficiency rating between 1 and 100+. A higher SAP score means lower predicted energy use and carbon emissions. Properties scoring above 100 indicate a net exporter of energy, meaning they generate more energy (e.g., through renewables like solar PV) than they consume.

SAP calculations serve three main purposes:

  • They provide the SAP Rating, which reflects the property’s energy efficiency and estimates annual energy-related running costs
  • They demonstrate compliance with Part L of the Building Regulations in England and Wales (Section 6 in Scotland, Part F1 in Northern Ireland)
  • They generate the data needed for the property’s Energy Performance Certificate (EPC)

The SAP calculation is performed using government-accredited software, currently the SAP 10 version, which aligns with the latest Building Regulations and incorporates recent updates aimed at reducing carbon emissions and improving energy efficiency standards. These calculations have been a legal requirement for all newly built dwellings since 1995, with regulations tightened significantly in recent years due to European and UK climate policies.

Without a valid SAP calculation and EPC, Building Control cannot approve new dwellings, nor can such properties be legally sold or rented. This makes SAP calculations a legal necessity for new builds and qualifying renovations.

Who Needs a SAP Calculation and When?

By law, all new dwellings in England and Wales require a SAP assessment. Under Building Regulations Part L1A, an individual SAP calculation must be done for each new house or flat, usually twice: once at the design stage to prove compliance and again after construction as an “as-built” report.

Conversions that change a building’s use or create new dwellings also require a SAP calculation under Part L1B. This includes projects such as:

  • Barn conversions
  • Commercial-to-residential schemes
  • Conversion of a single dwelling into flats or apartments
  • Splitting existing properties into multiple units

Additionally, certain over-glazed extensions require a SAP calculation. If an extension exceeds the permitted glazing allowance—specifically having glazing over 25% of the floor area—a SAP calculation becomes mandatory. This ensures the extension meets the necessary energy performance and compliance standards.

SAP calculations are categorised as:

L1A SAP Calculations: For new builds, including design stage and as-built assessments.

L1B SAP Calculations: For conversions and over-glazed extensions, typically where energy demand changes significantly.

For comprehensive guidance tailored to your specific project type, explore our detailed guides:

In summary, if your project involves a new dwelling or significant alteration, a SAP calculation must be submitted to Building Control or an approved certifier before construction can proceed. Without it, the project will not meet Part L requirements and cannot be approved.

How Does a SAP Calculation Work?

SAP calculations involve a thorough and detailed assessment of a property’s energy-related features. The assessor gathers information on construction elements (walls, floors, roofs and their insulation values), airtightness, window and door specifications, heating and hot water systems, fuel sources, ventilation, lighting, and renewable technologies like solar panels or heat pumps.

Using this data, the SAP software builds two digital models: a “notional” reference dwelling built to standard specifications, and the proposed design. It then calculates the Dwelling Emission Rate (DER) and Primary Energy Rate (DPER) for your property and compares these to target figures. To comply, your design’s emissions and energy use must not exceed these targets.

The headline emissions target is achieved using the DER/TER figures, where CO2 emissions are measured by comparing a Target Emission Rate (TER) against the predicted Dwelling Emission Rate (DER). This target rate is set within the SAP assessment by reference to a notional dwelling—a version of the proposed home, of the same size and shape, using baseline values.

Additionally, SAP assesses Fabric Energy Efficiency (FEE) by comparing your dwelling’s performance (DFEE) against a target (TFEE). This evaluates how well the building retains heat, measuring energy demand in kilowatt-hours per m² per year rather than carbon emissions. Both emission and fabric efficiency targets must be met at design and as-built stages.

SAP calculations are predominantly location independent and based upon standard occupancy patterns, allowing fair comparison of energy running costs between dwellings across the UK while overcoming variations from physical location and differing occupant behaviour.

It’s important to note that SAP focuses on fixed building elements, excluding variable occupant behaviour like appliance use or cooking energy. Improving insulation, heating efficiency, and incorporating renewables can increase your SAP score—leading to lower energy bills and reduced carbon emissions.

The SAP Assessment Process: A Step-by-Step Guide

The SAP assessment typically involves four key stages:

Stage 1: Design Draft

The SAP assessor uses plans and specifications to create a preliminary assessment. From the drawings provided, the assessor prepares numerical information such as total floor area, external window and door dimensions, and story heights. The assessor calculates thermal element performance (U-values) and inputs these into the SAP calculation software to determine compliance with Part L requirements.

Stage 2: Design Final

After revisions and agreement on the final design, the assessor produces a report for Building Control with a Predicted Energy Assessment (PEA). This finalised design may involve amendments to achieve SAP compliance, and provides an energy performance rating based on the agreed specifications.

Stage 3: Built Draft

Following construction and an Air Pressure Test (APT), the assessor updates the SAP calculation to reflect variations from the original specification. The APT result and any construction changes are incorporated to verify the completed dwelling still meets Part L requirements.

Stage 4: Built Final

The final SAP calculation is completed, and an EPC is generated based on the actual build. The assessor ensures the dwelling is registered on the government’s central database and provides EPC reference details for the official EPC Registry.

What Information Is Needed to Complete a SAP Assessment?

To complete a SAP calculation accurately and efficiently, the assessor requires detailed information about the property’s design and construction. Typical data needed includes:

  • Architectural plans and specifications: Floor plans, elevations, sections, and site plans (showing orientation for assessing solar gains and shading), with details showing dimensions, materials, and construction types
  • Construction details: Wall, floor, and roof build-ups, including insulation materials and thicknesses with U-values where available
  • Window and door specifications: Sizes, types, glazing, frames, and performance ratings (U-values representing the rate at which heat passes through openings)
  • Heating and hot water systems: Types of boilers or heat pumps, fuel source, controls, and efficiency ratings
  • Ventilation systems: Mechanical or natural ventilation details, including any heat recovery systems
  • Renewable energy installations: Details of solar PV, solar thermal, heat pumps, or other renewables, including capacities and controls
  • Airtightness strategy: Target airtightness level or planned test results if known
  • Lighting: Types and efficiency of fixed lighting installations, including percentage of low-energy lighting
  • Thermal bridging schemes: For thermal junctions and thermal bridging, specify which thermal bridging scheme is being followed where applicable

Providing comprehensive and accurate information at the design stage helps ensure the SAP calculation is precise, avoids delays, and enables early identification of potential compliance issues.

Detailed SAP Calculation Types: L1A and L1B

SAP calculations come in two formats depending on the project:

L1A SAP Calculations (New Builds)

Divided into two reports:

Design Stage Report: Assesses planned construction details, input into SAP 10 software, producing Target Emission Rate (TER) and Target Fabric Energy Efficiency (TFEE) rates, demonstrating compliance by showing predicted energy performance.

As-Built Report: Post-construction reassessment, including actual equipment, airtightness test results, and workmanship, producing the final EPC.

L1B SAP Calculations (Extensions and Conversions)

Divided into ‘notional’ and ‘proposed’ reports:

Notional Report: Benchmarks the entire property’s current performance using standard values.

Proposed Report: Inputs actual performance data for new or upgraded elements. The proposed DER and DFEE must be better (lower) than the notional values for the project to pass.

Passing the SAP calculation is mandatory to generate a valid EPC that allows the property to be legally sold or rented.

The Importance of Early SAP Assessments

SAP assessments should be carried out before construction begins to verify that the planned design will pass Part L requirements. Building Regulations require that a SAP calculation and Predicted EPC be submitted for new dwellings prior to commencement of work.

Starting early allows for refinement of the design, optimising insulation, heating controls, airtightness, and renewable integration, preventing costly redesigns or retrofits. This is crucial because many homes do not pass ‘first time’ and will not initially comply with Part L due to tightening CO2 emission targets.

Recent years have brought significant changes to SAP metrics and Part L Building Regulations. An average new build designed just five years ago is highly unlikely to pass current regulations today. Starting work without a design stage SAP assessment is not advisable.

Working closely with a SAP assessor and design team enables multiple assessments to find a compliant solution. Engaging early—often before planning submission and certainly before building regulations applications—helps avoid unsuitable, expensive technologies added in hindsight just to pass building regulations.

Understanding EPC Ratings and Legal Requirements

The Energy Performance Certificate (EPC) rates properties between A (best performance) and G (worst performance) across two measures: energy efficiency rating and environmental impact rating. Since April 1st, 2018, it has been against the law to rent a property with an F or G rating in either category.

Without a valid EPC, you may face fines or be unable to sell or rent your property. The SAP rating indicates a score between 1 and 100+ to estimate annual energy-related running costs, with 100 representing zero energy cost and anything over 100 meaning the property is a net energy exporter.

Practical Tips to Improve Your SAP Score

  1. Beat minimum U-values: Aim to improve insulation in walls, roofs, and floors beyond regulatory minimums. Minimum U-values are there to be beaten, not followed—if the fabric is well insulated, you won’t need expensive renewable technologies to achieve compliance.
  2. Use high-performance windows and doors: U-values of 1.4 W/m²K or better help reduce heat loss. Pay attention to the U-values on openings you’re specifying and get them as low as possible.
  3. Focus on heating controls: Zoned heating and weather compensation controls often impact SAP scores more than the heating system itself. Load and weather compensators for boilers frequently have more significant effects on SAP ratings than the boiler type.
  4. Ensure airtightness: Conduct pre-completion airtightness checks to meet targets. All new builds require Air Pressure Testing (APT) on completion, and the resulting figure goes into the SAP calculation. The more airtight a dwelling, the better the ventilation system needs to be to prevent condensation build-up.
  5. Manage thermal bridging: Follow thermal bridging schemes to avoid default heat loss penalties. Heat loss through junctions with external walls significantly impacts performance.
  6. Incorporate renewables: Solar PV, heat pumps, and other technologies can boost scores and lower energy demand.
  7. Consider fuel type impacts: Properties without mains gas connection may need oil or LPG systems, which have higher cost and CO2 emission factors within SAP. Since Target Emission Rates are set based on mains gas systems, alternative fuels present additional compliance challenges.

Working with a SAP Assessor

SAP calculations must be performed by accredited assessors (OCDEAs—On Construction Domestic Energy Assessors) registered with certification bodies like Elmhurst or Quidos. Early engagement with an assessor provides valuable guidance on compliance and design optimisation.

A knowledgeable SAP assessor can help shape the energy profile of a new dwelling, minimising energy use and carbon emissions while ensuring cost-effective compliance. They can model different design variations if initial specifications don’t show compliance and recommend solutions for shortfalls.

After construction, the assessor completes the as-built SAP and issues the On-Construction EPC, which Building Control requires for final approval. Generally, assessors aim to complete reports within 5-10 working days after request, though this depends on project complexity and timeline.

A qualified SAP assessor is crucial to avoid costly last-minute changes and add value by certifying energy efficiency to future owners or tenants.

What Happens If Your Building Fails?

If your building fails its SAP assessment, it cannot legally be sold or rented without a valid EPC. This can delay projects and incur additional costs, with limited scope for changes later in the construction process.

Common failure factors include insufficient insulation, poor heating controls, excessive thermal bridging, inadequate airtightness, or unsuitable fuel types. The complexity of modern SAP requirements means numerous factors can influence results—from boiler sizing to wall junctions, floor insulation thickness, or even building orientation.

Involving a SAP assessor early in the design process helps ensure cost-effective compliance from the start and prevents expensive redesign work. Many companies only carry out calculations, but choosing assessors who provide consultancy support throughout the SAP process ensures you have the information and advice needed to pass.

Summary

SAP calculations are essential for demonstrating compliance with Part L of the Building Regulations for all new dwellings and major renovations in England and Wales. They provide a government-approved energy efficiency rating, help generate the legally required EPC, and ensure your project meets stringent carbon emissions and energy demand targets.

Properties scoring over 100 on the SAP scale are net energy exporters, often achieved through effective renewables integration—a key goal of sustainable building design. With regulations tightened significantly since their introduction in 1995, achieving compliance requires careful planning and expert guidance.

The SAP assessment process involves detailed modelling of your property’s fabric and services, comparing performance against notional dwellings and target rates. Success depends on exceeding minimum standards for insulation, using efficient heating controls, ensuring airtightness, managing thermal bridging, and incorporating appropriate renewable technologies.

Engage early with a qualified SAP assessor to optimise your design, secure approval, and deliver a compliant, efficient dwelling that meets today’s demanding energy performance standards.